time coming into contact with the AT32 series of domestic flight controllers, please install the following drivers first:

Connect to betaflight configurator's COM driver:
https://drive.google.com/file/d/1edIEESK6lgo2lHQYzjq8ywgLZRgKMNnj/view?usp=sharing

Update firmware DFU driver:
https://drive.google.com/file/d/1KY2xKEmKlPVwNKdak0vA7J8ByE1K6KTw/view?usp=sharing


About the target latest 4.4.1 branch firmware download address:https://drive.google.com/file/d/1qE3OMDcfSUXu645AcpHtpkMde7CUc2sa/view?usp=sharing

Note: It will conflict with LED_STRIP when X8 mode is enabled, if you need to use X8, please disable LED_STRIP function.

1. MCU:STM32F745VGH6,216MHz,1MB Flash
2. Gyro-1 MPU6000 (SPI1)
3. Gyro-2 BMI270(SPI2)
4. OSD:AT7456E (SPI4)
5. Blackbox: SPI FLASH 125M(SPI3)
6. Baro&MAG:Infineon DPS310&QMC5882(I2C1)
7. 7xUarts(1,2,3,4,6,7,8)&2x I2C(I2C2 shared Uart3)
8. Firmware:Beatflight(NEUTRONRCF7AIO)
9. Mounting:30.5 x 30.5mm Φ 4MM
10. USB: TYPE-C
11. Power input 4-12S (15-55V)
12. Dual BEC:5V 2.0A(Max 2.5A)
13. Current sensor (Scale 100) & Voltage sensor (Scale 210) 12V 1.5A(Max 2.0A)
14. 4x LEDs for FC Status and 3.3V/5V/BAT
15. SH1.0-6pin,DJI/Vista straight plug

Included :
1 x NeutronRC F745 X8 12S Flight Controller
4 x Rubber
2 x Cable