MCU:STM32F745VGH6,216MHz,1MB Flash
2. Gyro-1 BMI270 (SPI1) CW=0
3. Gyro-2 MPU6000(SPI2) CW=0
4. OSD:AT7456E (SPI4)
5. Blackbox： SPI FLASH 32M(SPI3)
6. Baro：Infineon DPS310(I2C1)
7. 7xUarts(1,2,3,4,6,7,8)&2x I2C(I2C2 shared Uart3)
8. Firmware：Beatflight（NEUTRONRCF7AIO)
9. Mounting：30.5 x 30.5mm Φ 4MM
10. USB: Mirco USB
11. Power input 3-8S Max 40V
13. Current sensor (Scale 50)&Voltage sensor (Scale 210)
12. Dual BEC:5V 1.5A&12V 1.5A
14. 5x LEDs for FC Status and 3.3V/5V/12V/BAT
15. ESCMCU:STM32G071GB 64MHz
16. FD6288 3in1 driver
17. SH1.0-6pin,DJI/Vista straight plug
18. MOSFET NEXPERIA 40V 280A
19. Current 80A(8S)
20. ESC Firmware:BLHeli_32


Size: 44 x 44 x 6MM
Weight: 9 grams
Power input: 3-8S MAX 40V LIPO


About frame:

3-8S 80A 5-10 inches (10 inches 3110 900kV 8S; 10 inches 3110 1250KV 6S)

NOTE:
If you use BMI270 gyroscope, it is recommended to use the enhanced version 270 driver firmware, download address:

And import the BMI270 preset;

https://drive.google.com/drive/folders/17zQxUK2B29przvQEltSKtcArksZ9e7zT?usp=sharing

If you use MPU6000, you can directly use Betaflight 4.5 firmware; there is no need to use enhanced firmware and import the BMI270 preset;